Sunday, April 12, 2009

Old Tires / Wheels

I got a response from my motor controller manufacturer; it turns out the controller has an 80V cutoff so I won't be able to test it until I get my full pack in. The Spitfire is much happier with my new electrical system though (at least according to the car's voltmeter), and I've cleaned up the wiring a bit...


My wife bought me tires for Christmas, but I haven't had time to install them as I've been busy with other parts of the car. My existing tires weren't looking too pretty...


Unfortunately the picture also shows the sad shape of my wheels. After I pulled off the two rear tires I saw just how bad the wheels were. Lots of dents and rust. So much so I'm surprised one of they still hold air! Looks like I'll have to replace them as well.

The Spitfire has a bolt pattern of 4-95.25 - completely nonstandard so the junkyard is out. http://www.victoriabritish.com has a few styles of wheels, but they start at $660. I tried 3 local tire stores, but they'll have to call their suppliers on Monday to get more information. Apparently they may be able to take an unfinished 13" wheel and drill my bolt pattern into it. I'm also keeping an eye on Craigslist. I don't mind a fresh set of wheels on the car, but I'd like to keep it as inexpensive as possible.

Sunday, April 5, 2009

Fuse Block

As I mentioned last week, the original wiring on the Spitfire was a mess. After my low speed test failed, I decided to take one of the questionable items out of the equation and bypass the car's original electrical system.

I already had the relay, but I went ahead and bought a new fuse block. Rather than attach all the negative connections to random spots on the car's ground, I bought the model that included the negative terminals. I'll use one of the car's original 12V lines that is closed when the car is "on" to trigger the 12V relay closed. To minimize any resistance / uncertainty, the relay + will be wired directly to where the battery's + cable goes. The fuse block - will be wired directly to where the battery's - cable goes. I won't mess with any of the car's original 12V components since they more/less work now.


I also found two excellent locations for my new components. The fuse block will go next to the car's original fuse(?), and the relay will sit nicely next to the pot box.


Components screwed down and wiring started...


Wiring finished. The new fuse block will handle the motor controller and both contactors. If I add anything new to the car it will also use the new block. Over time I may even transfer some of the car's original components to it.


I tried a second low speed/voltage test with the motor controller. I used two 12V batteries in series - here's the "high voltage" side wired up...


The batteries...


Results: Still didn't work! The contactors and key switch should be operating fine now. I sent an e-mail to the motor controller manufacturer asking for some help. Hopefully he can point me in the right direction as to what's wrong.

Sunday, March 29, 2009

Control Box Pt. 4

I wired one of the contactors (with precharge) and the controller to the car's 12V auxiliary system. I haven't seen my new controller in action yet and wanted to see it spin the wheels. There were many loose wires underneath the hood that were disconnected when the engine was removed. I didn't know what they went to, but I used a multimeter to test which ones gave me 12V supply when the key was turned to the on position.


The car wired...


I jacked up the rear end so the tires could spin freely, put the key in the car, turned it to on, and gave it some "gas". The contactor clicked, but the wheels wouldn't spin. I did notice the voltmeter I had installed inside the car showed only 8V with the controller hooked up to the 12V line under the hood. I tried a different 12V line for the controller and the voltmeter showed a much healthier 11V.

What's interesting is I've had the meter show under 10V below (due to loose battery connections), and the radio wouldn't work - probably due to low voltage protection. With the controller installed at 8V the radio still worked though. Unfortunately the car's electrical system is such a mess I can't trace back where those 12V lines originate from.

The 12V + from the auxiliary battery...


A random 30A fuse... Is that the fusebox?


I'm not even going to try...


I'm disappointed that I couldn't get a low speed test done with the controller, but this has convinced me that I need to build a secondary fuse box/system for the car. I'll leave what's existing that works alone, but all my new components will run off the new fuse box.

Sunday, March 22, 2009

Control Box Pt. 3

Yesterday I went over to a coworker's house and his (amazing) machine/garage shop. He had a handful of copper pieces that he offered to use for the connections between my electrical components.


It was a big game of Tetris trying to see which pieces fit best where.


His vice...


Me working with the grinder...


The first piece!


The second piece!


And fast forward... everything done!


The copper pieces really turned out great. By some miracle the layout I had made weeks earlier worked just right with the copper pieces he had. Thanks so much John!

Thursday, March 19, 2009

Control Box Pt. 2

A friend from work is going to help me wire the components, but he was busy this past weekend. Probably for the best though, as I was able to prep the base for permanent attachment into the car. Where we left off last week...


Happy with the location, I drilled mounting holes through my aluminum motor mount and the front of the control (box?) base. After adding a couple 5/16" bolts...


It actually held very nicely. The base only mounted at the front but it was resting at several locations on the car's frame. I was able to jiggle the back end of the base a little more than I was comfortable with. With smooth streets it wouldn't have been a problem, but I didn't want my control components to be shaking with every small bump in the road.

I looked into all sorts of ways to fix the back end, but what seemed to work best was just sliding rubber strips between the base and the car's frame.


The rubber strips act as great shock absorbers, but they may not last long term. I'll have to see how they hold up with a few miles of driving. I'll play around with other ways to restrain the rear of the plate later.

I found some extra metal sheeting in my storage room that I could use to cover the holes of the base.


Then I stripped off all the electrical components...


And began drilling the component mounting holes through my new metal sheeting...


Next up was a couple coats of shiny black paint...


Looks great!


Haven't yet, but I think I'll use JB weld along the edges to bond the two metal plates. For now the component bolts hold them together very well.

Sunday, March 8, 2009

Control Box Pt. 1

My controller arrived!


Posts lately have been lacking as I've waited for the electrical "brains" to arrive, but now they're all here! I didn't mind the wait too much though - it gave my checking account a nice break before purchasing the batteries and charger.

Finding a platform to fit all the components was a challenge. I scratched my originals plans of the plexiglass because of strength concerns. I wanted something that would last a while so no plastic or wood. I searched around for a good metal box, but no store seemed to carry them in anything other than plastic. I ended up finding a reinforced metal base meant for hanging tools at Walmart. I'd prefer to have an enclosed box with no holes but this would work for now. Now all I needed to do was fit my parts on it!


Rough idea... I actually modeled all the parts in AutoCad as well to try and organize the layout / wiring. The fan locations are to be determined.


Marked and drilled some holes...


Bolted together...


Not yet permanently attached, but it looks darn good in the car!


Next up, wiring it!

Monday, February 16, 2009

Speaker

The car came with a shiny new CD player but no speakers. I searched around the car and couldn't even find any factory designated mounts for speakers. There wasn't any extra space available (without major changes) around the driver's seat, but I did find a good spot by the passenger for a speaker.


I didn't know what the existing metal brackets were for, but they would soon become the brackets for my speaker mount. I measured the opening and took my jig saw to some 1/2" MDF board.


Test fit into place - looks good!


Primed...


Painted...


Mount in place...


Speaker in mount...


Looks great and works great too! I can now listen to the radio while working on the car. I still need to clean up and hide the rest of the CD player's wiring though...